Saving and Recalling Dante Controller Presets Dante Controller allows you to save your patch settings between audio devices. This article will cover how to save and load presets in this software. Confirm Routing: 1. Verify all of your audio devices are routed correctly by testing the inputs and outputs of each device. 2. Ensure correct labeling between subscriptions. If you're unsure how to label your inputs in Dante Controller, please refer to our article Labeling Inputs in Dante Controller. Save the Preset: Now that everything has been routed correctly, it's time to save your preset. 3. Press File > Save Preset (or Cmmd+S). You will arrive at a menu asking you what devices should be included in the file. 4. Save the settings for all of your devices by selecting the All button. 5. Extend the window by pressing Advanced near the bottom of the Save Preset screen to see a list of parameters that you can choose to include or skip over in the save file. 6. Choose a name and location on the computer for the preset. Recalling Presets Your preset will have been saved as an XML file (a text file that contains information and data.) 1. Go to File > Load Preset, or just press Cmd+L. The file explorer will open, and that will be your time to select the preset you would like to open. Upon opening the preset file, you will be brought to this screen in Dante Controller: 2. Select from left to right: Select parameters you want reflected in the preset you are about to open. Selectdevices in the current routing will be which in the recalled preset. Look for issues that could affect the loading process. 3. When finished press OK near the bottom of the screen. 4. Confirm your settings and presets are being loaded into Dante Controller. All Done! Nice work! Now you know how to save and recall presets in Dante Controller.