Refilling CO2 for the Pea Soup Hazer

The Pea Soup Phantom hazer requires compressed CO2 (Carbon Dioxide) gas to function. This gas mixes with the haze fluid and creates the atmospheric effect that will show the light rays moving through the air. However, this gas eventually runs out, and needs to be refilled. This article covers the process to ordering a refill of the CO2.

CO2 Refill Guide:

When To Order:

Please monitor the CO2 tank level. The level of the CO2 tank is shown on the left gauge, or input gauge, on the regulator as shown, circled in yellow below.

New tanks have approximately 1000PSI, which is shown in red on the regulator gauge. When the CO2 tank level reaches zero, the hazer stops outputting haze shortly after.

There should 2 CO2 tanks at the campus: one primary and one backup tank. After the primary tank is depleted, please order a refill as soon as possible to ensure there is always a backup on site.

How To Order:

You can order more haze through this link.

To schedule a tank swap, log in to your Streamline account and search "CO2". Select “Airgas” and then “CO2 Refill- CD FG20”.
Select the correct campus option for your campus in the dropdown and ensure it gets coded to your correct budget. Fill in the best person of contact for Airgas to reach out to, as someone will be coming to swap the tanks.

Before the new tank shows up, make sure it is disconnected and is placed somewhere accessible to Airgas. If they cannot access the tank or the old tank is't disconnected, they will not swap the tanks.

For instructions on how to disconnect the empty tank and connect the backup tank, please refer to the article: Installing CO2 tank for Phantom Hazer.

If your hazer fluid inventory is low, learn how to order more hazer fluid.